Roof Installations Halifax

Fittings installed properly, not just bolted on

A skylight or roof window is only as good as the flashing around it. We fit them with the correct upstand and flashing kit for the roof covering, so there's no weak point left behind.

We also handle roofline installations — fascias, soffits and bargeboards — where these need replacing alongside roofing work.

Every installation is, in effect, a deliberate hole in a working roof. That is fine when the opening is trimmed properly, the flashing kit matches the covering, and the membrane is dressed into the frame rather than cut back and left. It is a problem when any one of those is skipped, and it is why we see so many roof windows that leak from the day they went in.

The same applies to roofline. Fascias and soffits are not just cosmetic; they carry the guttering and close off the roof against birds and weather. Replacing them while a roof is already scaffolded is far cheaper than coming back to do it as a separate job later.

Scaffolded semi-detached house in Halifax during roofline and roof window works

Roof Installations

What our installation work covers

The work most often included when we take on roof installations around Halifax and the Calderdale valleys. Anything outside this list, just ask — if it is on a roof, we most likely do it.

Roof window and skylight installation, new openings or existing
Existing roof windows replaced like for like
Correct flashing kits for slate, tile and flat coverings
Openings trimmed and structurally supported
Fascia, soffit and bargeboard replacement
New guttering and downpipes fitted
Solar panel mounting brackets fitted and weathered
Dry verge, dry ridge and roof ventilation systems

What to look for

When an installation is worth doing

Installation work is usually planned rather than urgent, but there are a few points where it clearly pays for itself.

A loft room with no natural light

Adding roof windows transforms an attic conversion, and it is far simpler to do while scaffold is already up for other work.

An old roof window that leaks

Seals and flashing kits have a finite life. Replacing the unit and the flashing together is usually cheaper than repeatedly chasing the leak.

Rotten or sagging fascia boards

Once the fascia goes soft, the guttering it carries starts to pull away and water runs down the wall instead of into the downpipe.

Birds or draughts getting into the loft

Gaps at the eaves and verge let wildlife and weather in. Closing them properly also improves how the roof ventilates.

Scaffolding already up for other work

Roofline, ventilation and roof windows all get significantly cheaper when the access cost is already covered.

Planning a solar installation

Mounting brackets need fitting into the roof structure and weathering in properly, not screwed through the covering and sealed over.

Roof Installations

Getting a roof window watertight

A roof window or skylight sits lower than the covering around it, so water arriving from above has to be led around it and back onto the roof below. That is the job of the flashing kit, and kits are specific to the covering — a deep-profile tile kit will not seal against slate, and a slate kit will not sit down onto a pantile. Fitting the wrong one, or reusing an old one on a new window, is the most common reason a new roof window leaks.

Underneath the flashing, the breathable membrane has to be dressed into the window frame and drained onto the covering, not cut off short at the opening. Get that wrong and any condensation or wind-driven water that gets past the glass has nowhere to go except into the ceiling below.

Structurally, cutting a rafter to make an opening means trimming the opening with new timber to carry the load around it. On most domestic roofs that is straightforward, but it is not something to skip — and on larger openings or where more than one rafter is affected, it needs looking at properly before anything is cut.

Roof Installations

Installation work we take on

A snapshot of the installation jobs we handle around Halifax.

Roof windows

Openings trimmed correctly and fitted with the right flashing kit for your covering, so the roof stays watertight.

Roofline

Fascias, soffits, bargeboards and guttering replaced — ideally while the scaffold for other work is still up.

Solar mounts

Brackets fixed into the structure and weathered in, rather than screwed through the covering and sealed over.

How it works

How a roof installation job runs

The same four steps every time, whether it is an emergency callout at two in the morning or a job booked in for next month. You always know what happens next and what it costs before we start.

Call 07447 665264

Step 01

Talk it through

What you want, where it goes, and whether the roof and structure will take it without complications.

Step 02

Survey and quote

We check the covering, the rafters and the access, then price the job including the correct flashing kit.

Step 03

Fit

Openings trimmed and supported, units set in, flashing and membrane dressed properly around them.

Step 04

Finish and test

Weathertightness checked, internal finish made good where agreed, and all waste removed.

Pricing

What affects the cost of an installation

Installation work is quoted per job rather than off a list price, because access and the state of what's already there usually matter more than the fitting itself:

The size and number of units, and whether openings need cutting or already exist
Your roof covering, which determines the flashing kit required
Whether rafters need trimming and structural support adding
For roofline, the length of run and whether the timber behind it has rotted
Access — tower, scaffold, or work carried out alongside an existing scaffold
Whether the work is being done on its own or as part of a larger roofing job

Where we work

Roof Installations across Halifax & Calderdale

We are based on Pellon Lane in Halifax and cover the town and the surrounding valleys for roof installations — Halifax, Elland, Brighouse, Sowerby Bridge, Mytholmroyd, Hebden Bridge, Ripponden, Illingworth, Ovenden, Siddal, Southowram, Northowram, Queensbury, Stainland, Luddendenfoot and Warley. If your village is not on the list, it is worth a call anyway; we work well beyond the places named here.

Halifax

Elland

Brighouse

Sowerby Bridge

Mytholmroyd

Hebden Bridge

Ripponden

Illingworth

Ovenden

Siddal

Southowram

Northowram

Queensbury

Stainland

Luddendenfoot

Warley

See our full coverage area

FAQs

Roof Installations in Halifax — common questions

Can you fit a roof window into an existing roof?

Yes. We cut and trim the opening, add the structural support around it, and fit the unit with the correct flashing kit for your covering. Fitting a skylight into an existing roof is one of the most common jobs we take on for loft conversions and attic rooms around Halifax.

Do I need planning permission for a roof window?

Usually not — most roof windows on a rear or side roof slope fall under permitted development, provided they don't project much above the roof plane. Front elevations, conservation areas and listed buildings are different, and we'll flag anything that looks like it needs checking with the council.

Why is my existing roof window leaking?

Nine times out of ten it's the flashing kit rather than the window. Either the wrong kit was used for the covering, the old kit was reused on a new unit, or the membrane wasn't dressed into the frame. All three are fixable without necessarily replacing the window itself.

Can you replace my fascias and guttering at the same time as other roofing work?

Yes, and it's much the cheaper way to do it. The scaffold is already up and the eaves are exposed, so the additional cost is largely materials and labour rather than access.

Do you fit the solar panels themselves?

We fit and weather in the mounting brackets and make the roof good around them, working alongside your solar installer who handles the panels and the electrical side. Doing the roof side properly is what keeps the installation watertight for the panels' lifetime.

Will fitting a roof window make the loft colder?

A modern double or triple-glazed unit performs far better than the roof covering around it did before insulation, so in a converted, insulated loft the difference is minimal. In an uninsulated loft space, it's worth dealing with the insulation at the same time.

Other services